7. ACCESSORIES
7.1 Round jet tip inserts
The round jet tips are especially suited to spray pipes, profiles and
complex workpieces.
Part-No. Marking Volume flow Jet width Recommended filter
1) 2)
0132 720 R 11 0.160 appr. 250 mm
0132 721 R 12 0.220 appr. 250 mm
0132 722 R 13 0.270 appr. 250 mm 180 mesh
0132 723 R 14 0.340 appr. 250 mm
0132 724 ✕ R 15 0.380 appr. 250 mm
0132 725 R 16 0.430 appr. 250 mm
0132 726 R 17 0.480 appr. 250 mm 100 mesh
0132 727 R 18 0.530 appr. 250 mm
0132 728 R 19 0.590 appr. 250 mm
0132 729 R 20 0.650 appr. 250 mm
0132 730 R 21 0.710 appr. 250 mm 50 mesh
0132 731 R 22 0.770 appr. 250 mm
✕ Standard tip
1) Volume flow in l/min water at 100 bar
2) Jet width in mm at a distance of 30 cm from the object and at a pressure of
100 bar
GM 2000 EAC - EN
7.1
