WATER HEATING HOLD SIGNAL LIGHT
DELAY’WASH SIGNAL LIGHT
CYCLE CONiROL KNOB
CLEAN SIGNAL LIGHT
Selecting a cycle
POTS & PANS Cycle
Maximum cleaning for cooked- or
baked-on foods. Timer delays whrle
the dishwasher automatically heats
the water to 145 F (63 C] in both
washes and the last rinse (marked *).
Cycle time will be about 1% to 2
hours, depending on time needed
to heat water.
HEAVY WASH Cycle
A double wash for heavily soiled
loads. Cycle time is about 75
minutes.
NORMAL WASH Cycle
For normal, everyday soiled loads.
(The Energy Guide Label data is
based on this cycle.) Cycle time is
about 65 minutes.
LOW ENERGY WASH Cycle
For pre-rinsed or lightly soiled
loads. Cycle time is about 60
minutes.
RINSE & HOLD Cycle
For rinsing a few items to be
washed one or more days later.
Cycle time is about 15 minutes.
Use AIR DRY only. Do not use HI-TEMP WASHING Option.
Changing a setting
2. Turn the Cycle Control Knob clockwise to the
cycle you want.
You can change a setting anytime during
3. Be sure the detergent dispensers are filled
any cycle.
properly for the new cycle.
1. Press in the door latch to unlatch the door
4. Close and latch the door. The dishwasher will
and stop the cycle.
automatically start the new cycle.
The RESET OPTIONS Button
push the RESET OPTIONS Button. Re-select an
If you want to change a selected option,
option if desired,
0
