A SERVICE OF

logo

Open as PDF
next previous
Removing the oven bottom
The panel in the oven bottom can be
removed for cleaning.
Burn Hazard
Make sure all parts
are
cool before
removing.
Failure to do so could result in burns.
To remove:
1. Remove
oven racks.
2.
Remove
the two hold-down screws at the
rear of the oven. If screws are too tight to
remove by hand, use a screwdriver.
3.
Place
fingers in slots in bottom panel and
lift
rear of panel up and back until lip at
the front of panel is clear of front frame of
oven cavity.
4. Lift
bottom up and out.
To replace:
1. Place
oven bottom panel in oven with the
back raised about 6 inches or until you
can insert the hold-down lip at front of
panel under the front frame of oven
cavity.
2. Push
back of oven bottom panel down
fully into place on metal flanges on rear
wall and insert the hold-down screws.
20