The Storage Drawer
The storage drawer is for storing pots and pans. The drawer can be removed to
make it easier to clean under the range, and to check for installation of the
anti-tip bracket.
Use care when handling the drawer.
Removing lhe stomge drawer
1.
Empty drawer of any pots and pans
before removing drawer. Pull drawer
2. Lift back slightly andzde drawer
straight out to the first stop. Lift front
all the way out.
and pull out to the second stop.
Replacing the stomge drawer
4. Fit ends of drawer slid~ails
into
the drawer guides on both sides
of opening.
2. Lift drawer front and push in until
metal stops on drawer slide
rails clear white stops on drawer
guides. Lift drawer front again
to clear second stop and-slide
drawer closed.
18
To verity the anti-tip bracket
Is engaged:
l Remove the storage drawer.
l Look to see if the anti-tip bracket is
attached to floor with screws.
l Make sure one rear leveling leg is
positioned under the anti-tip
bracket.
l See Installation Instructions for
further details,
