Cleaning and caring for your range
CONTROL PANEL AND KNOBS SURFACE UNITS AND
REFLECTOR BOWLS
REMOVING
1.
First make sure oven and surface unit
control knobs are set on OFF. All knobs
pull straight off. Surface unit knobs have
a collar and spring.
2. Use warm soapy water and a soft cloth to
wipe the panel. Rinse and wipe dry.
3. Wash knobs and surface unit collars in
warm soapy water. Rinse well and dry.
4. Push knobs straight back on. Make sure
they point to OFF. Make sure the collar and
spring on surface unit knobs are put to-
gether as shown.
I.
Be sure surface units are OFF and COOL.
2. Lift the edge of the unit opposite the recep-
tacle just enough to clearthe reflector bowl.
3. Pull the surface unit straight away from the
receptacle.
4. Lift out the reflector bowl and trim ring.
13
