5.
Push
the Start/Enter pad. “Lo”“, HEAT,
TIMED and BAKE will light up in the
display to show that the oven is heating.
NOTE:
The display will show “door” and a
tone will sound once a minute for 5 min-
utes if the door is latched when you try to
bake/roast.
You can change the temperature or time
setting any time after pushing the Start/
Enter pad by repeating just Steps 2
through 4.
6. The display will count down the baking/
roasting time in minutes.
7. When the baking/roasting time is
completed,
the oven will turn off auto-
matically, beep four times and “End” will
show in the display. You will also hear
four 1 -second tones every minute until
you push the Off/Cancel pad.
NOTE:
To disable reminder tones, push
and
hold
the Cook Time pad for
4 sec-
onds. To reactivate tones,
repeat
this
procedure.
To cancel the MEALTIMER” control
setting:
l
Push
the Off/Cancel pad to return the
display to the time of day.
To delay start and stop
automatically
Method l-Using Cook Time
and Start Time:
1. Position
the oven rack(s) properly and
put
food in the oven.
2. Push
the Bake pad to enter the Bake
mode.
Use
the Temp pad(s) to set the
desired temperature.
Push
A to raise the
temperature or V to lower the tempera-
ture in 5°F increments.
Use
these pads
until the desired temperature shows in the
small display.
After you have set the desired tempera-
ture, the display will show the set tem-
perature and the time of day. BAKE will
light up.
71
