A SERVICE OF

logo

HANDLE INSTALLATION
LB2000 980088 03/08/03
3-
2
4.
Slide Bolt (item 3) thru, washers (item 2), Handle
Mount Brackets and Handle Assembly as shown.
Tighten bolt (item 3) and nut (item 1) until the
handle can not twist in the mount bracket (45-50
foot pounds).
5. Check handle for movement up and down.
6. Plug cord into handle cord receptacle.
HANDLE
ASSEMBLY
1
2
3
DECK
ASSEMBLY
HANDLE
MOUNT BRACKET
The machine is shipped with handle unassembled.
Follow these steps for installation:
1. Remove handle and deck assembly from
carton.
2. Remove bolt (item 3), washers (item 2), and
nut (item 1) from deck assembly.
3. Install Handle Assembly as shown.