Parts 41
29977 (Rev. 1/23/2009)
CUTTER HEAD GEARBOX ASSEMBLY
REF PART QTY DESCRIPTION
1 11155 1 S105 1.35:1 Gearbox complete -or-
1 11050 1 S106 1:1 Gearbox complete
2 11007 1 1-5/8 Flanged nut
3 11010 2 Seal for 2-1/8 shaft
4 11054 2 1-5/8 x 2-1/8 x 5/8 Sleeve
5 11114 4 Bearing cone
6 11115 4 Bearing cup
7 11209 1 .010 Gearbox gasket (used only if
more backlash is required)
8 11160 1 S105 Horizontal gear and shaft asy
(23-tooth) -or-
8 11057 1 S106 Horizontal gear and shaft asy
(17-tooth)
9 10055 1 1/8 SQ x 5-1/4 OD O-ring
10 11158 1 S105 Vertical gear & shaft asy (17-
tooth) -or-
10 11053 1 S106 Vertical gear & shaft asy (17-
tooth)
11 11056 1 1-5/8 ID x 3 OD x 10 GA Flat washer
(used alone) -or-
11 25367 1 1-5/8 ID x 2-3/4 OD x 10 GA Flat
washer (used with item 12)
12 25365 1 Gearbox washer retainer
13 11442 1 .062 x 4-1/2 ID x 5 Gasket
14 11005 1 Gearbox cover with plugs
15 11062 1 Housing with cups
16 11063 1 Horizontal housing with cups
17 1686 * 4 3/8 NC x 3/4 HHCS GR5
18 7832 * 4 5/8 NC x 1-1/2 HHCS GR5
19 23057 1 1/2 NPTF Vented pipe plug
20 7127 1 5/16 x 5/32 Dowel plug
21 7269 1 3/8 NC x 3/8 Flat point socket set
screw
22 23675 1 1" Breather vent pipe plug (not shown)
* Standard hardware, obtain locally
REF PART QTY DESCRIPTION
