27
¥ Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Important: if the supply cord is damaged, it must
be replaced by a special cord or assembly
available from the manufacturer or its service
agent.
¥ There are working parts in this product which
heat up. Always ensure that there is adequate
ventilation as a failure to do this will result in
component failure and possible food loss. See
installation instructions.
¥ Parts which heat up should not be exposed.
Wherever possible the back of the product should
be against a wall.
¥ If the appliance has been transported horizontally,
it is possible that the oil contained in the
compressor flows in the refrigerant circuit. It is
advisable to wait at least two hours before
connecting the appliance to allow the oil to flow
back in the compressor.
Environment Protection
This appliance does not contain gasses which
could damage the ozone layer, in either its
refrigerant circuit or insulation materials. The
appliance shall not be discarded together with
the urban refuse and rubbish. Avoid damaging
the cooling unit, especially at the rear near the
heat exchanger. Information on your local
disposal sites may be obtained from municipal
authorities. The materials used on this appliance
marked by the symbol are recicable.
CONTENTS
Warnings 26
Use 28
Cleaning the interior 28
Operation 28
Temperature regulation 28
Fresh food refrigeration 28
Freezing fresh food 28
Storage of frozen food 28
Thawing 28
Ice-cube production 28
Movable shelves 29
Door shelves 29
Hints 29
hints for refrigeration 29
Hints for freezing 29
Hints for storage of frozen food 30
Maintenance 30
Periodic cleaning 30
Periods of no operation 30
Interior light 30
Defrosting 31
Customer service and spare parts 32
Technical specifications 32
Installation 33
Electrical connection 33
Location 33
Rear spacers 34
Door reversibility 34
