25
3 Command Enhancements
And Differences
^A@ - Select Font by Name
This command only applies to built-in fonts or bitmap fonts downloaded via
the ~DB command.
^Ax - Select Alphanumeric Font
PPI uses scalable fonts rather than bitmapped fonts.
^B$x - Barcodes
PPI includes the following barcodes:
^B$A - UPC-E0
Command Format:
^B$A
fp, hgt, rdt, pos, chk
a: UPC-E0 barcode command
fp:
Barcode orientation
N = No Rotation (Default)
R = Rotate 90 degrees, clockwise
I = Rotate 180 degrees, inverted
B = Rotate 90 degrees, counter-clockwise
hgt:
Barcode Height
Value entered in dots at the printer dpi.
The default is 10 dots or the height set by the ^BY command.
If the height exceeds the label length, then the barcode is
cut off at the bottom of the label.
rdt:
Human readable data
Y = Print human readable data (Default)
N = No human readable data
pos:
Human readable data print position
Y = Print it above the barcode
N = Print it below the barcode (Default)
chk:
Mod-10 Check Digit
Y = Calculate and print check digit (Default)
N = No check digit
