A SERVICE OF

logo

Open as PDF
next previous
Using the application together with ZFX Tools
To access the ZFX Tools Editor and Librarian functions while
using Live Lite 7, proceed as follows.
Start ZFX Tools rst.
Access "Connect" from the menu and cancel
the connect setting of ZFX Tools and the G1u.
HINT
LeavetheUSBcableconnected.
While ZFX Tools is running, start Live Lite 7.
NOTE
ThereisnoneedtochangeanysettingsinLiveLite7.
To start recording, rst click the Record button
to set the application to the recording standby
mode. You can then start recording by clicking
the Play button.
Record buttonPlay button
Check the recorded content.
To play the recording, perform the following steps.
Click the Session View selector
to change to Session View.
1.
Turn the track activator on.
2.
Double-click the Stop button to move
the song position to the beginning.
4.
Click the Play button to start
playback of the recorded content.
5.
Raise the fader to obtain a
suitable volume.
6.
Move the master channel
fader down.
3.
Adjust the track recording level while playing
your instrument.
To obtain the optimum recording level, turn up the master
volume control on the G1u until just before the level meter
registers in red.
Level meterTrack activator
When the recording level setting is complete,
turn the track activator off.
The level meter is now shown in gray and the signal returned to
the G1u via the computer is muted.
NOTE
Ifthetrackactivatorison,theG1uoutputandthemonitoring
signalofthecomputerwillbeoutputsimultaneously,whichmay
causeaanger-likeeffectinthesound.
Click the Arrangement View selector to switch
to Arrangement View.
Arrangement View
selector
Clicking on the Arrangement View selector switches from
Session View to Arrangement View.
hArrangement View
NOTE
TheArrangementViewletsyouperformgeneralrecording,
arranging,editingandothertasksonatimeline.
From the "File" menu of Live Lite 7, select "New
Live Set".
When you execute "New Live Set", the following Live Set is
created.
hSession View
HINT
Toaddatrack,right-clickinthe"Clip/DevicesDropArea"and
use the menu that appears.
NOTE
TherearetwoviewsfortheLiveSet:SessionViewand
ArrangementView.TheinitialsettingisSessionView.Thisview
servesasascratchpadformusic,lettingyoufreelyimprovise
andarrangeideas.
Connect the guitar to the Input jack of the G1u
and select an effect patch.
Click the Arm button of the track on which you
want to record so that the track is ready to
record.
Arm button
Continued from overleaf
Mac OS X
Live Lite 7 installation Connections and preparation Using Live Lite 7 to record
Windows Vista/XP
For optimum performance
While using Live Lite 7, other applications may sometimes
slow down notably or become unstable.
If this happens frequently, consider taking the following steps
to optimize
the operation conditions for Live Lite 7.
Shut down other applications besides Live
Lite 7.
In particular, check for resident software and other utilities.
Reduce the number of plug-ins (effects,
instruments) used by Live Lite 7.
When there is a high number of plug-ins, the computer's
processing power may not be able to keep up. Reducing
the number of tracks for simultaneous playback can also be
helpful.
If applications still run very slowly or the computer itself does
not function properly, disconnect the G1u from the computer
and shut down Live Lite 7. Then reconnect the USB cable and
start Live Lite 7 again.
Trademark information
* Microsoft, Windows XP and Windows Vista are registered trademarks of Microsoft Corporation in the U.S.A. and in other countries.
* Mac OS and Core Audio are registered trademarks of Apple Inc. in the U.S.A. and in other countries.
* Ableton and Ableton Live are registered trademarks of Ableton AG.
* ASIO is a registered trademark of Steinberg Soft- and Hardware GmbH.
* MIDI is a registered trademark of the AMEI (Association of Musical Electronics Industry).
Live_Lite7-Startup-E-1