Chapter 32 Introducing the Commands
GS-3012/GS-3012F User’s Guide
224
mac-forward name <name> mac
<mac-addr> vlan
<vlan-id>
interface
<interface-id>
Configures a static MAC
address forwarding rule.
13
name <name> mac
<mac-addr> vlan
<vlan-id>
interface
<interface-id>
inactive
Disables a static MAC
address forwarding rule.
13
mirror-port Enables port mirroring. 13
<port-num> Sets a monitor port (the port
to which traffic is copied for
analysis).
13
mode zynos Changes the CLI mode to the
ZyNOS format.
13
mrstp <tree-
index>
Activates the specified STP
configuration.
13
hello-time <1-10>
maximum-age <6-40>
forward-delay <4-
30>
Sets Hello Time, Maximum
Age and Forward Delay to
the specifed tree.
13
priority <0-61440> Sets the priority of the switch
to the specified tree.
13
mrstp
interface
<port-list>
Activates MRSTP on the
specified ports.
13
path-cost <1-
65535>
Sets a path cost to the
specified ports.
13
priority <0-255> Sets the priority value to the
specified ports for STP.
13
tree-index <1-2> Assigns a specific STP
configuration to the ports.
13
multi-login Enables multi-login. 14
mvr <vlan-id> Enters the MVR (Multicast
VLAN Registration)
configuration mode.
See Section 32.10.6 on page
236 or more information.
13
no 13
bandwidth-control Disables bandwidth control. 13
bcp-transparency Disables bridging control
protocols such as STP.
13
classifier <name> Disables the classifier. Each
classifier has one rule.
If you disable a classifier you
cannot use policy rule related
information.
13
Table 83 Command Summary: Configure Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
