ADSL2+ Line Card
AAM1212-51/53
G.SHDSL.bis Line Card
SAM1316-22
VoIP Line Card
VoP1224-61
1U Remote MSAN/DSLAM
with AC/DC Power
IES-1000
AAM1212-53 Line Card
• One Telco 50 connector for 12-port ADSL/
ADSL2/ADSL2+ and splitter card over ISDN
• One mini RJ11 console port for local
management
• Two 10/100Base-TX for uplink
• DELT (Dual End Loop Test)
• SELT (Single End Loop Test)
• Power enhancement or ADSL power saving
mode
• Rate adaptation
• Status LEDs—System Status, Ethernet 1 and 2
Link Status, Ethernet 1 and 2 Active Status,
ADSL ports status, Alarm
• ADSL compliance
- DMT T1.413, issue 2
- G.DMT (ITU G.992.1)
- G.LITE (ITU G.992.2)
- G.HS (ITU G.994.1)
- Auto-negotiating rate adaptation
- ADSL2: G.992.3 Annex B
- ADSL2+: G.992.5 Annex B
SAM1316-22 Line Card
• One Telco 50 connector for 16-port G.SHDSL.bis
• One mini RJ11 console port for local
management
• Two 10/100Base-TX for uplink
• In-band Ethernet management
• Status LEDs: System Status, Ethernet Link Status,
Ethernet Active Status, G.SHDSL.bis ports status,
Alarm
• Line coding: TC-PAM
• Transmit power: up to 16.8 dBm
• Density: 16 ports per line card
• SHDSL payload format: ATM or EFM
• Rate adaptation mode: fixed, line probing
• Ethernet in the First Mile (EFM) according to IEEE
802.3-2004
• SHDSL.bis, extended data rates up to 5.7 Mbit/s
• STU-C or STU-R mode
• Fully integrated one solution for Ethernet,
Packet and ATM transport over 4/2 SHDSL
channels
• Asymmetric PSDs according to ITU-T G.991.2
(2004) Annex A and B fully supported
• In compliance with
- ETSI SDSL (ETSI TS 101 524 V 1.2.1)
- ETSI SDSL.bis (ETSI TS 101 524 V 1.2.2)
- ITU G.shdsl (ITU-T G.991.2)
- ITU G.shdls.bis (ITU-T G.991.2 (2004))
- ITU G.hs (ITU-T G.994.1)
- IEEE EFM (IEEE 802.3-2004)
- ITU-T G.998.1
VOP1224-61 Line Card
• One Telco 50 connector for 24 FXS ports over
POTS
• One mini RJ11 console port for local
management
• Two 10/100Base-TX for uplink
• Ringer Max output power: 14 Watt
• Support SIP singling protocol
• Support G.711, G.726, G.729 a/b, G.723.1
• Support T.38 fax/modem signal coding & fax
relay (G.711 a/m)
• Echo cancellation based on ITU-T G.168 , G.165
• Silence detection/suppression and Comfort
Noise Generation (CNG)
• Voice Activity Detection (VAD)
• Caller ID detection (for VoIP packets from uplink)
• 10K Busy Hour Call Attempts (BHCA)
• Configurable jitter buffer
• Support the generation of dial tone, second dial
tone, ringing tone (ring-back tone), busy tone,
off-hook warning tone
• Support call waiting, call hold, call transfer, return
and call back on busy
• MLT (Metallic loop testing for subscriber lines)
and GR-909 loop diagnostic
Physical Specifications
IES-1000M
• Dimensions: 440 (W) x 320 (D) x 44 (H) mm
• Weight: 3.7 Kg
AAM1212-51
• Dimensions: 170 (W) x 320 (D) x 35 (H) mm
• Weight: 0.9 Kg
AAM1212-53
• Dimensions: 170 (W) x 320 (D) x 35 (H) mm
• Weight: 0.9 Kg
SAM1316-22
• Dimensions: 170 (W) x 320 (D) x 35 (H) mm
• Weight: 0.9 Kg
VOP1224-61
• Dimensions: 170 (W) x 320 (D) x 35 (H) mm
• Weight: 0.8 Kg
Environmental Specifications
• Power supply (AC/DC)
- AC power: 100 ~ 240 V AC, 50 ~ 60 Hz
- DC power: -36 ~ -72 V DC
• Power consumption
- AAM1212-51: 25 W
- AAM1212-53: 25 W
- SAM1316-22: 25 W
- VOP1224-61: 30 W
• Operating temperature: 0°C ~ 50°C
• Storage temperature: -40°C ~ 70°C
• Operating humidity:10% ~ 90%
(non-condensing)
• Storage humidity: 10% ~ 95%
(non-condensing)
Certification
• Safety
- UL 60950-1
- CSA 60950-1
- EN60950-1
- IEC 60950-1
• EMC
- FCC Part 15B Class A
- EN55022 Class A
- EN55024 Class A
- ETSI 300386
• Reliability
- ETSI 300019
• Telecom
- ITU-T K20
