A SERVICE OF

logo

Open as PDF
next previous
Chapter 5 AP Mode
N220 User’s Guide
82
5.5 The MAC Filter Screen
The MAC Filter screen allows you to configure the N220 to give exclusive access
to devices (Allow all) or exclude devices from connecting to the N220 (Reject
all). The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the
MAC address of the device(s) to configure this screen.
Figure 60 The MAC Filter Screen
Pre-Shared Key Type a pre-shared key (same as the AP or peer device) of between 8
and 63 case-sensitive ASCII characters (including spaces and symbols)
or 64 hexadecimal characters.
Save Click to save the changes.
Cancel Click to discard the changes.
Table 24 Security Setting: WPA-PSK/WPA2-PSK
LABEL DESCRIPTION