Chapter 23 Maintenance
NWA-3500/NWA-3550 User’s Guide
268
23.5 Association List Screen
Use this screen to know which wireless clients are associated with the NWA. Click
Maintenance > Association List. The following screen displays.
Figure 174 Maintenance > Association List
The following table describes the labels in this screen.
WLAN1 This section displays only when wireless LAN adaptor WLAN1 is in
AP+Bridge or Bridge/Repeater mode.
WLAN2 This section displays only when wireless LAN adaptor WLAN2 is in
AP+Bridge or Bridge/Repeater mode.
Bridge Link # This is the index number of the bridge connection.
Active This shows whether the bridge connection is activated or not.
Remote Bridge
MAC
This is the MAC address of the peer device in bridge mode.
Status This shows the current status of the bridge connection, which can be
Up or Down.
TxPkts This is the number of transmitted packets on the wireless bridge.
RxPkts This is the number of received packets on the wireless bridge.
Poll Interval(s) Enter the time interval for refreshing statistics.
Set Interval Click this button to apply the new poll interval you entered above.
Stop Click this button to stop refreshing statistics.
Table 85 Maintenance > System Status: Show Statistics
LABEL DESCRIPTION
Table 86 Maintenance > Association List
LABEL DESCRIPTION
Stations
# This is the index number of an associated wireless station.
MAC Address This field displays the MAC address of an associated wireless
station.
