A SERVICE OF

logo

PoE-10 Single-port Power over Ethernet Injector
7
are located on the rear panel.
LAN 10/100M Ports
The PoE-10 has two LAN ports. The PWR&DATA port delivers power to your
PoE-enabled device. Use a straight-through Ethernet cable to connect the
PWR&DATA port to your PoE-enabled device.
The DATA port does not deliver power. Use an Ethernet cable to connect the
PoE-10’s DATA port to the LAN.
The maximum Ethernet cable length is 100m.
POWER Socket
WARNING: Use only the included power adaptor. It is suitable for
desktop use. Use of another power adaptor may damage the
PoE-10.
Connect the female end of the power adaptor to the PoE-10’s POWER socket.
Connect the female end of the power cord to the power adaptor and the male end
to a power source (wall outlet or power strip).