ZyXEL VES-1616/24FA-5x Series Support Notes
All contents copyright 2008 ZyXEL Communications Corporation.
114
FAQ
What are the default IP parameter settings?
IP address: 192.168.1.1
Subnet: 255.255.255.0
What is the default login Name and Password to log into the Web Configurator?
ID: admin
Password: 1234
How to access my SWITCH through the console port?
Connect the male 9-pin end of the console cable to the console port of the switch.
Connect the female end to a serial port (COM1, COM2 or other COM port) of your
computer. Launch a terminal emulation software configured to the follow settings:
Terminal emulation: VT100
Baud rate: 115200 bps
Data bits: 8
Parity: none
Stop bit: 1
Flow control: none
What is default login password for console, telnet, and FTP login?
Password: 1234
How to change the password?
You can only change the administrator login password in the web configurator..
After you log in for the first time, it is recommended you change the default
administrator password.
In the Web Configurator: Click Management > Access Control > Logins to
display the configuration screen as shown. Then change the password by settings
the password fields.
