A SERVICE OF

logo

Setting Up A RADIUS Server 653
3 Either re-boot the server or stop then restart the RADIUS service. To stop and
restart the Steel-Belted RADIUS service, go to Control Panel > Administrative tools
> Services. Scroll down to the Steel-Belted service, stop and restart it.
Funk RADIUS is now ready to run.
If you intend to use auto VLAN and QoS, you will need to create VLAN and QoS
profiles on the 3Com Switch 5500 and follow the instructions in Configuring auto
VLAN and QoS for Funk RADIUS.
4 Start the Funk RADIUS program, select Servers from the left hand list and select
Local Radius server. Select Connect to start listening for clients.
5 To add a user, select Users from the left hand list, enter the User name, Set
password and select Add.