Configuring the Module 3 - 27
This configuration sets up one interface for each bridged segment.
To assign an IP address or subnet mask for an interface:
1. From the Main menu, select option 1, Modify/View Configuration
Values, and press Return. The Modify/View Configuration Values
menu is displayed (see Figure 3-4).
2. From the Modify/View Configuration Values menu, select option 1,
Modify/View Network Settings, and press Return. The Modify/View
Network Settings menu is displayed (see Figure 3-6).
3. From the Modify/View Network Settings menu, select option 1, 2, or
3 (depending on which interface you want to modify) and press
Return. The Modify/View Network Interface 1 Settings menu is
displayed (Figure 3-7).
4. To assign:
a. An IP address, select option 1. The module displays the current
value and prompts you to enter a new value.
b. A subnet mask, select option 2. The module displays the current
value and prompts you to enter a new value.
5. To modify an IP address or subnet mask, delete one character at a
time using the Backspace key. To delete the entire value, press Ctrl-U.
6. Enter the new value and press Return.
7. Select S to save the changes and return to the previous menu.
8. Repeat steps 3 through 7 to assign an IP address and subnet mask
for each interface.
