Configuring PAD/ATPAD Ports 1
Configuring PAD/ATPAD Ports
Overview
Introduction
This manual describes the PAD and ATPAD port configurations used on PathBuilder
S200 series switches. It includes explanations of both PAD port types, commands
that can be used, and how to configure a node for either PAD or ATPAD operation.
Before You Begin
Before you can configure parameters, you must log on to the local node’s control
terminal port. Refer to the
Configuration Basics Guide
for CTP procedures.
In This Manual Topic See Page
About Packet Assembler/Disassembler ........................................................ 2
Typical Applications ..................................................................................... 3
PAD Port Configuration ............................................................................... 4
Configuring the PAD Port ........................................................................ 7
PAD Port Configuration for Autocalling ................................................. 20
PAD Port Configuration for Autospeed ................................................... 22
PAD XON/OFF Support Using X.25 Interrupt Packets ........................... 23
PAD Prompt Table Record ........................................................................... 25
PAD Prompt Table Record Parameters .................................................... 26
PAD Profile Table Record ............................................................................ 27
PAD Profile Table Record Parameters ..................................................... 29
Copying PAD Profile Tables into a Configuration ................................... 44
Remote PAD Parameter Table Record ......................................................... 49
Remote PAD Parameter Table Record Parameters .................................. 50
Detailed PAD Port Statistics ......................................................................... 53
ATPAD Ports ................................................................................................ 57
ATPAD Operation .................................................................................... 58
Configuration ........................................................................................... 61
ATPAD Port Statistics .............................................................................. 70
