2-4 Service Guide
2.2 Startup Configuration
The Startup Configuration screen contains parameter items that are set up when the computer
starts up.
Startup Configuration
Boot Display --------------------------- [Auto]
Memory Test --------------------------- [Enabled]
Silent Boot ----------------------------- [Enabled]
System Boot Drive ------------------- [Drive A Then C]
Boot from CD-ROM ------------------ [Enabled]
CardBus Support -------------------- [Enabled ]
USB Function Support ------------- [Disabled]
↑↓
=Move Highlight Bar,
→←
=Change Setting, Esc=Exit
Press ↑ and ↓ to move the highlight bar; press →
and ← to change the setting of the highlighted
parameter. To exit this screen and return to the main screen, press
Esc
.
The following table describes the parameters in this screen. Settings in
boldface
are the default
and suggested parameter settings.
Table 2-2 Startup Configuration Parameters
Parameter Description Setting or Format
Boot Display Sets the display device (computer LCD and/or
external monitor) to use when the computer
starts (boots) up.
When set to
Auto
, the computer outputs to the
external monitor if one is connected; otherwise,
the computer outputs to the LCD.
Auto
Both
Memory
Test
Runs or skips the memory test.
Enabled
Disabled
Silent Boot Hides or displays the POST (Power-on Self-
Test) screen messages.
Enabled
Disabled
System Boot
Drive
Sets the startup (boot) sequence of the drives in
your computer.
For example, when set to
Drive A Then C
, the
computer searches for a system (bootable)
diskette in drive A first before proceeding with
drive C.
Drive A Then C
Drive C Then A
Drive C
Drive A
