Chapter 4. Status
61200217L1-1 T3SU 300 User Manual 4-5
DTE PORTS
The following status information is available for DTE Ports 1-4.
Interface Type
The interface type of the port is shown in this field (HSSI or V.35).
Port Status
This field displays the current port status. Possible states are listed
in the following table:
Condition Description
Inactive The port is installed, but idle. Activate a port
through the
P
ORT
S
TATE
field of the
DTE P
ORT
C
ONFIGURATION
menu.
Active The port has been configured and is passing
data.
Error An error condition such as loss of transmit clock
has occurred.
In Test The unit is currently in test mode.
Waiting for
DTE
The port has been configured and is waiting for
the DTE to issue the appropriate handshaking sig-
nals. For the HSSI interface, the terminal equip-
ment available (TA) signal must be asserted by
the DTE. For V.35, DTR is required if the TR field
is set to
I
DLE
W
HEN
O
FF
; otherwise, DTR is ig-
nored. The TR field is found in the
DTE P
ORT
C
ONFIGURATION
menu.
