5 6
Meter Functions-Voltage (DCV)
The meter will automatically select the
best voltage (V) range.
Insert:
Black lead in COM terminal.
Red lead in
V-
Ω
-RPM
terminal Touch
the Black probe to ground or to the
negative (-) circuit.
Touch the Red probe to the circuit coming
from the power source
IMPORTANT: voltage must be
measured in parallel (Red probe
measuring circuit from power source).
Accuracy
Selection of a lower range will move the
decimal point one place and increase
the accuracy. An “I” display means the
range is too low,select the next higher
range.
WARNING
When measuring voltage,be
sure the Red test lead is in
the terminal marked “V”.If the
test lead is in an Amp (A)or
Milliampere (mA) terminal,
you may be injured or the
meter damaged.
