ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 2
7-105
Field 5
Assigns a BCCOS to the preference. Permitted numbers include any previously
defined BCCOS from procedure 014, word 1. However, BCCOS = 4 is the
recommended option.
Procedure 107 Word 1: ISDN Trunk Verification by Terminal, Attendant, and ATMS
This procedure must be translated to support the trunk verification by voice terminal and trunk
verification by attendant features over ISDN-PRI facilities. Figure 7-53, Procedure 107 Word 1:
ISDN Trunk Verification by Terminal, Attendant, and ATMS, depicts this procedure.
ENHANCED MODE - PROCEDURE: 107, WORD: 1
ATMS - TERMINATING TEST LINE ASSIGNMENT
1.
2.
Trunk Group:
Test Line Type:
TTL TELEPHONE DIGITS
3.
4.
5.
6.
7.
8.
9.
Digit 1:
Digit 2:
Digit 3:
Digit 4:
Digit 5:
Digit 6:
Digit 7:
Digit 8:
11.
12.
13.
14.
15.
16.
17.
18.
Digit 9:
Digit 10:
Digit 11:
Digit 12:
Digit 13:
Digit 14:
Digit 15:
Digit 16:
10.
DISPLAY ONLY
19.
Trunk Type:
Connected to CC0 ON-LINE
enter command:
Field 1
Figure 7-53. Procedure 107 Word 1: ATMS TTL Assignment (System 85 R2V4)
Identifies those ISDN-PRI trunk groups to be accessed by the trunk verification
features. Permitted encodes are previously defined trunk group numbers within the
range of 18 through 999.
Field 2
Dash (–), is appropriate for voice terminal and attendant console applications.
If a transmission test line is used, its type should be specified.
Fields 3-18
Assigns digits for the terminating test line.
NOTE: Procedure 107, words 2-7, need only be translated whenever ATMS is used.
