~2~
12
3
5
9
11
10
6
7
4
8
13
14
12
1. Infrared Sensor
2. Three position Dome Light Switch
3. Dome Lights –
4. Channel ( ) Button –
6. Auto Program Button –
– Allows the remote control to operate the VDS102T and to control the shuttle when docked.
• Auto – Automatically switches on the dome lights in conjunction with the vehicle’s interior
illumination.
• Off – The dome lights will not turn on in this position.
• On – Turns on the dome lights.
Provide additional interior illumination.
Used this button to increase the channel number to the desired number.
Allows the user to scan and store active TV stations into memory.
5
5. Channel ( ) Button –
7. Screen Release –
8. Shuttle Shut-off Switch –
9. Security Lock Knob –
10. 24 Pin Signal Interface Connector –
11. Shuttle Release –
12. POWER Button –
13. FMM Select Button –
14. Source Select Button –
6 Used this button to decrease the channel number to the desired number.
Moves in the direction of the arrow to release the drop down screen.
Turns off the shuttle when closed.
Used to ensure that the shuttle is not released accidentally.
Used to connect the shuttle to the docking station.
Press to release the shuttle from the docking station.
Used to turn the system ON/OFF. Bright red when system is on, dim when off.
When this button is pressed it will turn on the wireless FM Modulator and
then cycle through the available FM frequencies (FM Off, Channel 1, 88.3MHz; Channel 2, 88.7MHz;
Channel 3, 89.1MHz; Channel 4, 89.5MHz; Channel 5, 89.9MHz).
Used to select one of the three sources (DVD, AV1, TV)
