22
Jumpers are built on the mainboard to allow the user flexibility to configure the
mainboard settings to meet their specific requirements. The 810T mainboard se-
ries come with three jumpers. All the jumpers have three 3-pins.
When there is a jumper cap inserted on pins 1 and 2 we say PIN 1 and PIN 2
are SHORT. When the jumper cap is inserted on pin 2 and 3, we say PIN 2 and
PIN 3 are SHORT (see the diagram below).
2.7.1. JP1: OnNow Function
Default: PIN 1 and PIN 2 Short (Disabled)
Short: PIN 1— PIN 2 OnNow Function Disabled
Short: PIN 2— PIN 3 OnNow Function Enabled
The Keyboard and PS/2 Mouse OnNow function is built into the mainboard. You
may use Keyboard and Mouse clicks to power up your system. If your keyboard or
mouse is not compatible with the new OnNow function use JP1 to disable it.
PIN 1 and PIN 2: SHORT PIN 2 and PIN 3: SHORT
Three Pin Jumpers
PIN 1 PIN 2
PIN 3 PIN 1
PIN 2 PIN 3
Hardware Installation
Note: This connector can only be used with an ATX power supply
Hardware Installation
Hardware Installation
2.7. Jumper Settings
2.7. Jumper Settings
2.7. Jumper Settings
