37
CMOS Setup Utility - Copyright (C) 1984 - 2000 Award Software
Power Management Setup
ACPI Function [Enabled]
Item Help
ACPI Suspend Type [S1 (POS)]
Power Management [User Define] Menu Level !
!!
!
Video Off Method [Blank
Video Off In Suspend [Yes]
Suspend Type [Stop Grant]
Modem Use IRQ [3]
Suspend Mode [Disabled]
HDD Power Down [Disabled]
Soft-Off by PWR-BTTN [Instant –
Wake-Up by PCI card [Disabled]
Power On by Ring/LAN [Disabled]
Resume by Alarm [Disabled]
X Date ( of Month) Alarm 0
X Time (hh : mm : ss) 0 0 0
*** Reload Global Timer Events
Primary IDE 0 [Disabled]
Primary IDE 1 [Disabled]
Secondary IDE 0 [Disabled]
Secondary IDE 1 [Disabled]
FDD, COM, LPT Port [Disabled]
PCI PIRQ [A-D]# [Disabled]
3.7 Power Management Setup
3.7 Power Management Setup
3.7 Power Management Setup
ACPI function
ACPI function
ACPI function
If you wish to use the ACPI function, you have to use an operating system, like
Windows 98, that supports ACPI. During Windows 98 installation, you will have to
provide specific parameters ( please refer to Windows 98 manual for the
parameters ).
When the ACPI function is installed in your PC system successfully, you will find
the ACPI function in the power management icon. The PW switch defined by the
ACPI is different to the BIOS setup and it always has the higher priority than what
was defined in the system BIOS.
BIOS
BIOSBIOS
BIOS
BIOS Setup
BIOS Setup
