BSX Isolated Audio Entry System
PD-142 Issue 1 Installation and Operating Manual Page 7 of 32
Equipment & Design Considerations
Summary of Equipment Required
One entrance, 1 to 8 phones
One entrance, 9 to 16 phones
Two entrances, 1 to 8 phones
Two entrances, 9 to 16 phones
Basic model with privacy switch
Full Feature Model
Including Privacy and Door Monitor
Entrance Panel
(with Trades Button)
Vandal Resistant Panel
e.g. VRP8, (VRP8+ Trades)
Laser-Cut Vandal Resistant Panel
e.g. LCP10, (LCP10 + Trades)
Fail Secure Lock Release (12V)
Fail Safe Lock Release (12V)
Surface Mount Exit Button
12V 7AH Sealed Lead-Acid Battery
Entrance Panel
All Entrance panels are Vandal Resistant and made from 2.5mm marine grade (316)
stainless steel. Each panel is fitted with a high quality Speech Unit (model 61) and low
profile vandal resistant buttons. Panels are available up to 1 to16 buttons plus trades and
include custom engraving details. They are supplied with ‘tamper-proof’ security screws.
The standard VRP series are available both Flush and Surface mounted.
The LCP series panels have a flush mounted design and offer additional Vandal Resistant
features over the VRP series; the panel’s outer bezel is welded to a stainless steel back-
box whilst the inner removable panel has been ‘Laser Cut’ to ensure a minimal gap which
prevents the insertion of tools.
Control Equipment
All the control equipment for each system is supplied in a wall-mountable, lockable steel
cabinet. It includes all necessary control PCBs, a Power Supply with battery backup
capability and a Time-clock to control Tradesmen’s access. The cabinet should be
installed in a protected indoor environment.
Phones
Model 801 Phone
The 801 and 801S are the standard models. Ring volume is selectable to Low or High with
an internal jumper. The 801S ringer may also be muted in the event of nuisance calls;
