Introduction 7
External Control Panel
3. Left
4. Exit
5. Right
6. Menu
2. Source
7. Auto
8. Blank
11. Lamp indicator
10. Temp indicator
9. Power indicator
1. Power
Power
Press the Power key to turn the projector on
or off.
Source
Selects signal sources from among PC,
YP
bPr, S-Video and Video.
Left Exit Right Menu
Menu will display the menu system on
screen. Press Menu again to access the sub-
menus. Left and Right help you navigate
among choices and settings in the menus
and sub-menus. However, when the on-
screen menu is not activated, the Left and
Right buttons will function as Keystone -/+
hot keys.
Press the Exit button to go back to the main
menu. Press Exit again to leave the menu
system.
Auto
Automatically determines the best picture
settings for current received signals.
Blank
Use Blank to hide the screen image. To
unseal the image, press Blank again to turn
the image on immediately.
Power indicator
It will light up or flash when the projector is
under operation.
Temp indicator
The Temp indicator will flash when the sys-
tem temperature is too high, which may
occur if the projector is operated improperly.
See "Temp Information" on page 27 for
more detailed information.
Lamp indicator
The Lamp Indicator will light up when the
lamp needs service or replacement. See
“Lamp Information” on page 25 for more
detailed information.
1
2
3
4
5
6
7
8
9
10
11
