Operation16
Digital Keystone Correction
Keystoning refers to the situation
where the projected image is
noticeably wider at either the top or
bottom. To correct this, press 3
Left/ Right 4 (hot key) on the
control panel of the projector or
KEYSTONE 3/4 on the remote
control, and then adjust the sliding
bar labeled Keystone, as needed.
Press + to correct keystoning at the
top of the image. Press - to correct
keystoning at the bottom of the
image.
Auto Adjustment
In some cases, you may need to optimize the
picture quality. To do this, press the AUTO key
on the control panel of the projector or on the
remote control. Within 3 seconds, the built-in
Intelligent Auto Adjustment function will re-
adjust settings to provide the best picture
quality.
Source Selection
When several input sources are available,
press the SOURCE key to make a selection
from the control panel of the projector or
the remote control.
