31
Using the projector
English
Setting a preferred color temperature
To set a preferred color temperature:
1. Highlight Color Temperature and select User 1, User 2, or User 3 by pressing / on the
projector or remote control.
2. Press to highlight Color Temperature User_ Fine Tuning and press ENTER. The Color
Temperature User_ Fine Tuning page is displayed.
The menu name "User_" corresponds with the setting selected in Color Temperature.
3. Press / to highlight the item you want to change and adjust the values by pressing / .
• Red Gain/Green Gain/Blue Gain: Adjusts the contrast levels of Red, Green, and Blue.
• Red Offset/Green Offset/Blue Offset: Adjusts the brightness levels of Red, Green, and Blue.
4. To save and leave the settings, press MENU on the projector or MENU/EXIT on the remote
control.
Selecting a Gamma setting
Highlight Gamma Selection and select a preferred setting by pressing / on the projector or
remote control.
Gamma refers to the relationship between input source and picture brightness.
• Gamma 1/2/3
Select these values according to your preference.
• Gamma 4
Increases the average brightness of the picture. Best for a lit environment, meeting room or family
room.
• Gamma 5/6
Best for viewing movies in a darkened environment.
• Gamma 7/8
Best for viewing movies which are mostly composed of dark scenes.
Adjusting Brilliant Color
This feature utilizes a new color-processing algorithm and system level enhancements to enable higher
brightness while providing truer, more vibrant colors in picture. When set to "Off", Brilliant Color is
disabled.
High Brightness
Low Contrast
Low Brightness
High Contrast
1
2 3 4 5 6 7 8
SH940_EN.book Page 31 Wednesday, October 3, 2012 2:36 PM
