47
Using the projector
English
System Setup menu
Function Description
Language
Sets the language for the On-Screen Display (OSD) menus. See "Using the
menus" on page 22 for details.
Splash Screen
Allows you to select which logo screen will be displayed during projector start-
up. You can choose BenQ logo screen, Blue screen or Black screen.
Projector Position
The projector can be installed on a ceiling or behind a screen, or with one or
more mirrors. See "Choosing a location" on page 12 for details.
Background Color
Allows you to choose the color of the background screen that will be displayed
when there is no input source detected.
Menu Settings
Menu Display Time
Sets the length of time the OSD will remain active after your last key press. The
range is from 5 to 30 seconds in 5-second increments.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Reminder Message
Sets whether to display the OSD messages about the status of detecting signals.
Operation
Settings
Direct Power On
Sets whether to turn the projector directly on without pressing the
POWER key on the projector or remote control when the projector is
plugged in.
Signal Power On
Sets whether to turn the projector directly on without pressing POWER or
ON when the projector is in standby mode and the signal is feed through the
VGA cable.
Auto Power Off
Prevents unnecessary projection when no signal is detected for a long time. See
"Setting Auto Power Off" on page 52 for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value between 30
minutes and 3 hours.
Input Source
Selects an input source to be projected. See "Selecting an input source" on
page 21 for details.
Auto Source
Search
Sets whether the projector searches automatically for input sources. If the
source scan is On, the projector will scan for input sources until it acquires a
signal. If the function is not activated, the projector selects the last used input
source.
SH940_EN.book Page 47 Wednesday, October 3, 2012 2:36 PM