SAVE THESE INSTRUCTIONS
For your safety, read and understand the information contained within. The owner and operator shall have an under-
standing of this product and safe operating procedures before attempting to use this product. Instructions and Safety
information shall be conveyed in the operators native language before use of this product is authorized. Make certain
that the operator thoroughly understands the inherent dangers associated with the use and misuse of the product. If
any doubt exists as to the safe and proper use of this product as outlined in this factory authorized manual, remove
from service immediately.
Inspect before each use. Do not use if broken, bent, cracked or otherwise damaged parts are noted. If the dolly
has been or suspected to have been subjected to a shock load (a load dropped suddenly and violently upon it),
discontinue use until checked out by qualified personnel. Owners and operators of this equipment shall be aware
that the use and subsequent repair of this equipment may require special training and knowledge. It is recom-
mended that an annual inspection be done by qualified personnel and that any missing or damaged parts, decals,
warning/ safety labels or signs be replaced with Blackhawk Automotive replacement parts only. Any dolly that
appears to be damaged in any way, is worn or operates abnormally shall be removed from service immediately until
such time as repairs can be made. Labels and Operator’s Manuals are available from the manufacturer.
PRODUCT DESCRIPTION
Blackhawk Automotive Wheel Dolly is designed to facilitate the removal and installation of pneumatic tires and wheel
assemblies on trucks, buses and trailers. It is a labor saving device useful in auto shops, bus barns and fleet service.
3
SPECIFICATIONS
Figure 2 - Model BH8075 Hydraulic Unit Components
Model Capacity
BH8075
3/4 Ton
(1500 Lbs)
Product Size (L X W X H)
39 7/8” X 43” X 33 1/4”
Lifting Range
3 1/2” ~ 11 3/4”
(12 5/8” w/ext. screw)
Net Weight
131.2 Lbs
Tilt Range
-2.5° ~ 10°
Figure 1 - Model BH8075 Components
Load Leveler
Chain
Main Frame
Lifting Arms
Rear Caster
Hydraulic Unit
Handle
Front Caster
Jack Handle
Oil Filler Plug
Release Valve
Saddle
Handle Sleeve
Ram
