Adjusting the Machine
4-59
4
Customizing Settings
Adjusting the Machine
This section describes how you can make fine adjustments to the settings of the
machine, such as making a fine adjustment to the printed image and the saddle
stitch position.
It is recommended that you clean and adjust the machine regularly.
Zoom Fine Adjustment
When you print a copy or a document from an inbox, a slight difference in size may
occur between the size of the original image, and the size of the copied/printed
image. In this case, you can perform a fine adjustment to compensate for this
difference.
1
Press (Additional Functions) ➞ [Adjustment/Cleaning] ➞
[Zoom Fine Adjustment].
2
Press [-] or [+] to adjust the percentage (%) ➞ press [OK].
If you are making an adjustment to either the X (horizontal) or Y (vertical)
direction, press [-] or [+] to enter a value for that direction only.
Saddle Stitch Staple Repositioning
You can reposition the stapler of the saddle stitcher unit after clearing a staple jam,
or after replacing the staple cartridge. Saddle stitch staple repositioning works by
feeding several sheets of paper into the saddle stitcher unit and stapling them
together.
IMPORTANT
•
Only use 11" x 17", LGL, or LTRR paper for the saddle stitch staple repositioning
procedure.
•
Make sure to remove all output booklets from the optional Booklet Tray before performing
the saddle stitch staple repositioning procedure.
