A SERVICE OF

logo

Open as PDF
next previous
108
Copying with CanoCraft FS Copy
Changing the Scanner Settings
Click the arrow (scanner selection) button to the right of the scanner
display box and select a scanner from the pull-down menu.
The name of the scanners registered in Windows will display in the pull-
down menu. (CanoScan FS2710 will normally display.)
Click the [Settings] button to the left of the scanner display box and
select a setting from the pull-down menu.
• Refer to the next page for instructions regarding the menu categories and
settings procedures.
Adjust the settings as required and click the [OK] button.