Using the Self
Using the SelfU sing the Self
Using the Self-
--
-Timer
TimerT imer
Timer
Wind the film advance lever.
Turn the multi-purpose lever counter-clockwise until
it stops.
Depress the shutter release button. The shutter will
be released approximately 10 seconds later.
Be sure to wind the film advance lever. Otherwise the
self-timer will act but the shutter will not be released.
The multi-purpose lever can also be used as the stop-
down lever even after the self-timer is cocked.
If the self-timer lever is set while the mirror is in an
up-position, the mirror is released. Therefore, always
reset the mirror in the up-position after setting the
self-timer.
If the self-timer lever is turned halfway, the shutter
button is locked and doesn't work. It doesn't get out of
order, because the shutter button will be released after
continuing to turn the lever completely.
Free Download at http://www.joe
