A B
B
A
31
8 Wireless Setup
Wireless Setup Using WCN (Windows Connect Now)
Read this section only when setting up a wireless connection by using the WCN (Windows Connect Now) function of Windows 7/Windows
Vista.
The machine supports “WCN-UFD”.
Setup on the Computer
Windows 7
1. Click Start > Control Panel > View network status and tasks >
Manage wireless networks.
2. Select the network name (SSID) and right-click it, then select
Properties.
3. Select
Copy this network profile to a USB flash drive.
Follow the on-screen instructions to complete the settings on the computer.
4. Go to
.
Windows Vista
1. From the Start menu of the Windows side, select Network, then click
Add a wireless device on the menu.
2. Click
I want to add a wireless device or computer that is not on the
list, using a USB flash drive.
3. Click
Add the device or computer using a USB flash drive.
4. Select the network name (SSID), then click
Next.
Follow the on-screen instructions to complete the settings on the computer.
5. Go to
.
Canon assumes no responsibility for any damage or loss of data stored on your USB
ashdriveregardlessofthecauseevenwithinthewarrantyperiod.
OperationmaynotbeguaranteeddependingonyourUSBashdrive.USBashdrives
with security enabled may not be used.
•
•
Setup on the Machine
1. Select Wireless LAN setup of the
Setup menu screen on the LCD (A),
then touch the OK button.
2. Select
Other setup, then touch the OK
button.
3. Select
WCN, then touch the OK button.
4. Connect the USB flash drive to the
Direct Print Port (USB connector) (B)
on the front right of the machine, then
touch the OK button.
5. When
Wireless LAN settings
completed. screen is displayed, touch
the OK button and eject the USB flash
drive.
Next, read “10 Install the Software
(Network Connection)” on page 35!
