Clock Functions
52
Choose [Low Level Format].
● Press the op buttons or turn the Ê dial
to choose [Low Level Format], then press
the qr buttons to display .
●
Press the
opqr
buttons or turn the
Ê
dial
to choose [OK], then press the
m
button.
Start the low level format.
● Press the op buttons or turn the Ê dial
to choose [OK], then press the m button.
XLow level formatting starts.
XWhen low level formatting ends, [Memory
card formatting complete] will appear.
Complete the low level format.
● Press the m button.
You can check the current time.
● Press and hold the m button.
XThe current time appears.
● If you hold the camera vertically while
using the clock function, it will switch to
vertical display. Press the qr buttons or
turn the Ê dial to change the display color.
● Press the m button again to cancel the
clock display.
• Low level formatting may take longer than standard formatting (p. 22),
since all recorded data is erased.
• You can stop a low level format of a memory card by choosing [Stop].
When stopping low level formatting, the data will be erased but the
memory card can be used without problem.
When the camera power is off, press and hold the m button, then press
the power button to display the clock.
