Setup
-10- Legend™ 412 Series User Manual Rev. 5
Before mounting this product, read and follow the Safety Notes in this manual.
Always mount this product in any safe position making sure there is adequate room for
ventilation, configuration, and maintenance.
CHAUVET® recommends using the following general guidelines when mounting this
product.
• When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
• Make sure to mount this product away from any flammable material as indicated in the
Safety Notes section.
• Never mount the product in places where rain, high humidity, extreme temperature
changes, or restricted ventilation may affect it.
• If hanging this product, make sure that the mounting location can support the product’s
weight. Refer to the Technical Specifications section for the weight requirement of this
product.
The Legend™ 412 Series comes with 1 omega bracket, which attaches
the product via M12 Allen bolts. This allows you to attach a single clamp
product. You may also attach 2 clamps directly to the fixture via the same 2 M12 mounting
screw holes. You must supply your own clamps and make sure the clamps are capable of
supporting the weight of this product.
Product Mounting
Diagram
