SlimBANK™ TRI-18 User Manual Page 11 of 19
(DMX)
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
The SlimBANK™ TRI-18 uses up to 13 DMX channels in its 13-channel DMX personality,
which defines the highest configurable address to 500.
If unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com
.
To select the DMX personality and starting address, do the following:
1. Press <MENU> repeatedly until 3-CH (3-channel mode), 5-CH (5-channel mode),
9-CH (9-channel mode), or 13CH (13-channel mode) shows on the display.
2. Press <ENTER> and d 1—d512 shows on the display.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
SlimBANK™ TRI-18 Sections for DMX Control
Section 1 Section 2
Section 3
