Administration
LLDP-MED
Cisco Small Business SG200 Series 8-port Smart Switch 86
3
• Management Address—The management interface IP address (see the
IPv4 Interface page or the IPv6 Interface page).
• Port ID SubType—The type of the port identifier.
• Port ID—The port identifier.
• Port Description—The port description.
• System Capabilities Enabled—The capabilities that are enabled on the
switch.
• System Capabilities Supported—The capabilities that are currently
advertised as supported by the switch.
The following switch parameters are advertised in Location TLVs.
• Subtype—The supported type of location information (civic, ELIN, or
coordinate-based).
• Coordinates—Switch GPS coordinates in hexadecimal format, if
coordinate-based location information type is used.
• ELIN Address—The ELIN number, if this location information type is used.
• Country—Country where the city is located, if the civic location information
type is used.
• City—City where the street is located, if the civic location information type
is used.
• Street—Street where the building is located, if the civic location information
type is used.
• Building—Building in which the switch is located, if the civic location
information type is used.
