C-3
Cisco UCS C420 Server Installation and Service Guide
OL-27640-01
Appendix C RAID Controller Considerations
RAID Controller Cabling
Example 1—One Nonexpander and One RAID Controller with Eight Drives
Figure C-1 shows an example of a server that is using one RAID controller in PCIe slot 3 and a
nonexpander transition card to control eight drives in the modular drive bay.
Two RAID cables are required (1 UCSC-CABLE-S and 1 UCSC-CABLE-L).
• The blue line is a 0.8m cable (UCSC-CABLE-S) from the RAID controller SAS 0 connector to the
nonexpander connector for PORT 1–4.
• The red line is a 1m cable (UCSC-CABLE-L) from the RAID controller SAS 1 connector to the
nonexpander connector for PORT 5–8.
• The green line is the cable from the RAID controller to the SCPM backup unit.
Figure C-1 RAID Controller Cabling Guidelines, Nonexpander Transition Card
1 Nonexpander transition card
(shown with fan tray removed)
3 RAID controller card in PCIe slot 3
2 SCPM backup unit
(mounted to tray on air baffle)
1 2 3
334371
