A SERVICE OF

logo

Open as PDF
next previous
3-29
Cisco UCS C420 Server Installation and Service Guide
OL-27640-01
Chapter 3 Maintaining the Server
Installing or Replacing Server Components
Figure 3-14 CPU Retaining Latches
Step 5
Remove a protective cap from the socket (if present).
If you are installing a new CPU to a socket that was shipped empty, the socket has a protective cap that
is intended to prevent bent contact pins. If you are removing an old CPU instead, skip to Step 6.
Use the tool as shown in Figure 3-15 to grasp the protective cap and then pivot to remove the cap.
Figure 3-15 Protective Cap Removal Tool
1 CPU retaining latch, 3 Hinged CPU cover plate
2 CPU retaining latch,
1
3
2
332093
333565