A SERVICE OF

logo

1-12 MP1600 Microportable Projector
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 11/08/99 5:08 PM
Part Number:383706-001 File name: BkCh1.doc
2. Raise the projector to the desired display angle, then press the
elevator button
1
on the front of the projector to release the
foot
2
.
3. To lower the display angle, press the button on the front of the
projector again and press down on the projector to lower it.
!
WARNING:
To reduce the risk of the projector tipping or
overturning, always turn the elevator foot 90 degrees
from its original position before pressing the elevator
button.
To fine-tune the leveling of the projector, hold the elevator
button in and adjust the leveling.