MP1600 Microportable Projector 1-23
Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 11/08/99 5:08 PM
Part Number:383706-001 File name: BkCh1.doc
8. To exit from
the on-screen menu, select
Exit
from the Main
menu. If the display is a second or third-level menu, select
Save and Return
or
Cancel,
then select
Exit
from the Main
menu.
The on-screen menu is easy to use; just follow the instructions on
the screen.
Explaining Functions in the On-Screen Menu
■
Brightness and Contrast—Adjusts the displayed image
brightness and contrast ranges from 0 to 100.
✎
An example of a standard setting is to set the contrast level to
67 and the brightness level to 50.
■
Position—Fine-tunes the horizontal and vertical positions of
the display.
■
Zoom—Magnifies an image up to a factor of 32 on the
projection screen (zooms in to a specific area on the screen,
and pans left, right, up, and down).
■
Keystone—Adjusts image distortion at the top and bottom
widths of the screen caused by tilting the projector.
■
Picture—Adjusts the gamma value or degree of contrast of
darkness or light for the projected image.
■
Color—Adjusts color balance to compensate for ambient
conditions using three submenus:
❏
7100
°
K—The factory default.
❏
Custom Color—Modifies the color temperature balance.
❏
Saturation—Magnifies the color intensity.
