Installation
Installing the Software
Version 1.03
2-6
This software is a Win32-Console-Application and runs
under Win95 and WinNT.
Usage:
- Connect your NetPorty II with one serial port.
- If you do not use COM1 please change it into the file
L.BAT.
-Start L.BAT.
- If you get error messages like
"BSL: no response from the target hardware"
it is possible that you have used the wrong COM
port.
- If you get the message below
"-- COMx Loading bootload.h86..Ready"
without any error message in the next line, all
activities are correct finished
- Leave the software with pressing the ESC key,
sometimes Alt X does not work.
Info:
The program LDFSER.EXE is a loader that burns
firmware in the Porty-Flash and also it is a serial monitor
to display firmware print-outs.
The serial parameter are 115200,8,n,1.
I+ME also can deliver a loader to start firmware in the
RAM and a little firmware demo (Keil-C).
Please contact us if you want to develop your own
firmware.
