Setting Up the Mobile Computer
14 Pegaso™ Industrial PDA with Windows
®
CE
3. Complete the two tabs (shown in Figure 6):
Figure 6. Modifying Network Connection Settings.
• IP Address: Select DHCP or set static IP settings.
•
Name Servers: If using static IP, set DNS and WINS servers.
RF Setup (Summit Client Utility)
The Summit Client Utility (SCU) is an application designed for users and
administrators of mobile devices that use a Summit radio module. Using SCU,
you can:
• Disable and enable the radio (turn it off and on)
• View the contents of configuration profiles, or configs, each of which
houses the RF, security, and other settings for the radio
• Select the config to be used to connect to a WLAN
• View global settings, which apply to every config
• View status information on the radio, the access point (AP) or WLAN
router to which it is connected, and the RF connection or link between
the two
• Troubleshoot a connection or performance issue, view in-depth diagnos-
tic information on the connection and the radio, and perform various
troubleshooting and diagnostic tests
1. To launch the utility go to
Start > Settings > Control Panel.
2. Tap on the Wi-Fi icon.
3. To make setting changes tap
Admin Login.
The default password is
SUMMIT.
For more detailed information on making changes to settings, please refer to the
PRG.
