A SERVICE OF

logo

Ram Ball Mounting Assembly
Installation Guide 13
Figure 8. Ram Ball Assembly
3. Use four screws (customer supplied) to secure one of the Ram balls to
the desired mounting surface. Set the other Ram ball aside to use later in
the assembly process.
4. Re-attach the Ram Ball Assembly to the Ram Ball you just affixed to the
mounting surface.
Final Assembly
1. Insert the Ram Ball, mounted to the rear of the Mobile Dock assembly,
into the Ram Ball assembly you earlier affixed to the mounting surface
(see Figure 9). Tighten the adjustment knob to secure the Ram Ball in
place.
Ram Balls
Adjustment
Knob
Screws