A SERVICE OF

logo

Installation Guide 17
Chapter 4
Power and Peripheral
Device Connections
This chapter describes connection of peripheral devices that are provided with
or available for the Pegaso PMD system. For more on power connections, see
“Electrical Considerations” starting on page 5.
Connections on the Dock
Figure 12 shows the connection located on the bottom of the dock. See the
following pages for more information about these connections.
Figure 12. Cable Connections
Power Connection
Insert the DC power cord at the power port on the bottom of the dock. When
power is applied to the dock, the Power-On LED will light.
COM port
Input Power
connection
USB OTG port