Using the System Setup Program | 123
Enables the SAS controller. Sets the device class code as
AHCI/RAID and executes the RAID Option ROM. This
token applies to on-board SAS controller.
Adjacent Cache
Line Prefetch
The processor will only fetch the cache line that contains
the data currently required by the processor.
Adjacent Cache
Line Prefetch
Enables the processor to fetch the adjacent cache line in
the other half of the sector.
Disables the processor's HW prefetcher.
Enables the processor' HW prefetcher.
Enables Serial Console Redirection.
This feature will allow the users to electrically disable the
external USB port2.
This feature will allow the users to electrically enable the
external USB port2.
This feature will allow users to disable the feature that
allows SATA HDDs to initiate link power management
transitions.
This feature will allow users to enable the feature that
allows SATA HDDs to initiate link power management
transitions.
For BIOS Setup to allow user enable the node interleave
option. This is for NUMA systems that allow memory
interleaving across all processor nodes.
For BIOS Setup to allow user disable the node interleave
option. This is for NUMA systems that allow memory
interleaving across all processor nodes.
Enables the I/O Acceleration Technology (I/OAT) DMA
Engine option. This feature should be enabled only if the
hardware and software support I/OAT.
Disables the I/O Acceleration Technology (I/OAT) DMA
Engine option. This feature should be disabled only if the
hardware and software support I/OAT.
Enables NIC1 with iSCSI Remote Boot.
